Command Description
The following session introduces the command structure of the command line interface.
Command groups:
System | - System commands |
Console | - Console commands |
Port | - Port commands |
VLAN | - VLAN commands |
Aggr | - Aggregation commands |
QoS | - QoS commands |
Mirror | - Mirror commands |
IP | - IP commands |
SNMP | - SNMP commands |
Ratelimit | - Rate setup commands |
Exit | - Logout commands |
System Commands
Commands at System level:
System Configuration [all]
System Restore Default [keepIP]
System UserName [<name>]
System Password [<password>]
System Systemname [<name>]
System Reboot
System Configuration [all]
Syntax:
System Configuration [all]
Description:
Show system name, username, password, software version and management MAC address. Optionally show the full configuration
[all]: Show the total switch configuration (default: System configuration only)
System Restore Default [keepIP]
Description:
Restore factory default configuration.
[keepIP]: Preserve IP configuration (default: Not preserved).
UserName [<name>]
Description:
Set or show the user name.
34
