Encore electronic ENMGS-24+4 Management guide, Access the management interface of the Switch

Management guide

Access the management interface of the Switch

This section instructs you how to enter and proceed the advanced management capability, which can be accessed through console port or Telnet session / Internet Browser over the network (in-band).

Manage the device via command line interface

To start-up the command line interface, please connect a PC COM port to the RS-232 connector and activate a terminal emulation software (e.g. HyperTerminal of Windows.)

The terminal emulation software should be started as the following configuration:

1.Data rate: 115200 baud

2.Data format: 8 data bits, 1 stop bit and no parity

3.Flow control: none.

4.Click the property icon, select settings, make sure that:

5.“The Function, arrow, and ctrl keys act as”: Terminal keys

”Emulation”: VT100

Note: To manage via command line interface, please find the “Appendix” for more information

Manage the device via WEB browser

To access the Web-based management interface, you should configure the management station with an IP address and subnet mask that compatible to your switch.

The factory default value of the switch:

IP：	192.168.1.1
Subnet Mask：	255.255.255.0
Default Gateway：	192.168.1.254
	11