SNMP Setup [enabledisable]
Description:
Activate or deactivate the SNMP.
[enabledisable]: Enable/disable SNMP (default: Show SNMP mode).
SNMP Trap [<IP Address>]
Description:
Set or show SNMP traps destination.
<IP Address>: IP address to send traps to. (default: Show trap configuration)
Ratelimit Commands
Commands at Ratelimit level:
Ratelimit Configuration
Ratelimit Setup <traffic type > <option>
Ratelimit Egress [<portlist>] [enabledisable] [<rate>]
Ratelimit Ingress[<portlist>] [enabledisable] [<rate>]
[<portlist>] | :Port list (default: All ports). |
[enabledisable] | :Enable or disable. |
[<rate>] :Set leaky bucket rate in Kbit/s[128/256/512/1024/2048/3072K] (default: Show rate).
Ratelimit Configuration
Description:
Show the Ratelimit setting.
Ratelimit Setup <traffic type > <option>
Description:
Set or show the ratelimit configuration. The allowed frame rates for
ICMP frames, learn frames, multicasts, broadcasts and flooded unicasts are controlled using a central ratelimit.
[<traffic type>] | : Ratelimit to set. Can be one of: |
| [ICMPBroadcastMulticast] |
| (default: Show all). |
[enabledisable] | : Enable or disable specified ratelimit. |
[<rate>] | : Frame rate in kiloframes |
| Allowed values are 1k, 2k, 4k, 8k, 16k, 32k, 64k, |
44
