Port Commands
Commands at Port level:
Port Configuration [<portlist>] Port Mode [<portlist>] [<mode>]
Port Flow Control [<portlist>] [enabledisable] Port Admin [<portlist>] [enabledisable]
Port MaxFrame [<portlist>] [<framesize>reset] Port Statistics [<portlist>] [clear]
#Note: If your want to change maxframe bigger than 1518. The [Flow Control] should be enabled!
Port Configuration [<portlist>]
Description:
Show the configured and current speed, duplex mode, flow control mode and admin state for the port.
[<portlist>]: Port list (Default: All ports).
Port Mode [<portlist>] [<mode>]
Description:
Set or show the speed and duplex mode for the port.
[<portlist>]: Port list (Default: All ports).
[<mode>] | : Port speed and duplex mode (Default: Show configured | |
| and current mode). | |
| 10hdx | : 10 Mbit/s, half duplex. |
| 10fdx | : 10 Mbit/s, full duplex. |
| 100hdx : 100 Mbit/s, half duplex. | |
| 100fdx : 100 Mbit/s, full duplex. | |
| 1000fdx: 1 Gbit/s, full duplex. | |
| auto | : Auto negotiation of speed and duplex. |
Port Flow Control [<portlist>] [enabledisable]
Description:
Set or show flow control mode for the port.
[<portlist>] : Port list (default: All ports).
[enabledisable]: Enable/disable flow control (default: Show flow control mode).
36
