LED for each port:
The switch provides one “1000M” LED and one “10/100M” LED for each port.
1000M LED: Shows the current transmitting/receiving speed of the port.
10/100M LED: Shows the link status and the activities on the port.
LED | Status | Operation |
| Green | The port is connected at 1000 Mbps |
1000M | Blinking Green | A valid link is established, and there is data |
| transmitting/receiving. | |
| Off | No valid link on this port or the Port is connected at |
| 10/100 Mbps | |
|
| |
| Steady Green | A valid link is established, and there is no data |
| transmitting/receiving. | |
|
| |
10/100M | Blinking Green | A valid link is established, and there is data |
|
| transmitting/receiving. |
| Off | No valid link on this port or the port is connected at |
| 1000 Mbps | |
|
|
Attention：The Mini GBIC slot shares the same LED indicator with the last 4
Port Operation
The
Media
Speed
Duplex Mode
10/100/1000Mbps(copper) | 10Mbps |
|
|
| 100Mbps |
|
|
| 1000Mbps |
1000Mbps(Fiber) | 1000Mbps |
(mini GBIC required) |
|
Full Duplex
Half Duplex
Full Duplex
Half Duplex
Full Duplex
Full Duplex
Note: For the last port, when both the fiber and cooper interfaces are connected, the system adapts the fiber interface and disables the relevant cooper port automatically.
6
