TP-Link Comprehensive Guide for Setup and Manual of the Nano Router TL-WR702N

TL-WR702N

150Mbps Wireless N Nano Router

Figure 3-16 Quick Setup - Finish

3.2.4 Bridge Mode

When you choose Bridge on Working Mode page in Figure 3-5 , take the following steps:

1.Click Next, and then Wireless Repeater page will appear as shown in Figure 3-17.

Figure 3-17 Quick Setup - Wireless Bridge

¾SSID - Enter a string of up to 32 characters. The same name of SSID (Service Set Identification) must be assigned to all wireless devices in your network. The default SSID is set to be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router’s MAC address). But it is recommended strongly that you change your networks name (SSID) to a different value. This value is case-sensitive. For example, TEST is NOT the same as test.

- 21 -