TL-WR702N150Mbps Wireless N Nano Router

1.Click the Enable button to enable this function.

2.Select the radio button “Allow the stations specified by any enabled entries in the list to access” for Filtering Rules.

3.Delete all or disable all entries if there are any entries already.

4.Click the Add New... button.

Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the MAC Address field.

Enter wireless station A/B in the Description field.

Select Enabled in the Status pull-down list.

Click the Save button.

Click the Back button.

The filtering rules that configured should be similar to the following list:

4.6.4 Wireless Advanced

Choose menu “Wireless Wireless Advanced”, and then you can configure the advanced settings of your wireless network.

Figure 4-12 Wireless Advanced

- 39 -

Page 45
Image 45
TP-Link manual Wireless Advanced, TL-WR702N150Mbps Wireless N Nano Router