TP-Link TL-WR702N manual Forwarding, 150Mbps Wireless N Nano Router, To Reserve an IP address

TL-WR702N

150Mbps Wireless N Nano Router

¾Status - The status of this entry, either Enabled or Disabled.

To Reserve an IP address:

1.Click the Add New… button. Then will pop-up.

2.Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal notation) of the computer for which you want to reserve an IP address.

3.Click the Save button.

Figure 5-25 Add or Modify an Address Reservation Entry

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

Click the Enable/Disabled All button to make all entries enabled/disabled. Click the Delete All button to delete all entries.

Click the Next button to go to the next page and Click the Previous button to return the previous page.

5.8 Forwarding

Figure 5-26 The Forwarding menu

There are four submenus under the Forwarding menu (shown in Figure 5-26):Virtual Servers, Port Triggering, DMZ and UPnP. Click any of them, and you will be able to configure the corresponding function.

- 77 -