TP-Link TL-WR702N manual Working Mode

TL-WR702N

150Mbps Wireless N Nano Router

6.4 Working Mode

The Router supports five operation mode types: AP, Router, Repeater, Bridge and Client. Please select one your want. Click Save to save your choice, which is shown as Figure 4-3.

Figure 6-3 Working Mode

¾AP - The wireless access point mode.

¾Router - The wireless Router Mode. In this mode, the device enables multi-user to share Internet via DSL/Cable Modem. The only wired port works as WAN.

¾Repeater - The wireless Repeater Mode. It could extend the range of wireless network.

¾Bridge - The wireless Bridge Mode. It could communicate with another wireless network.

¾Client - The Client Mode. The computer connected by Ethernet could get access to an AP by Client mode.

Click OK in the following screen and then the Router will reboot and to work on Repeater Mode.

Figure 6-4

6.5 Network

Figure 6-5 the Network menu

There is only one submenu under the Network menu (shown in Figure 6-5): LAN.

- 109 -