TP-Link TL-WR702N manual DHCP Clients List, Address Reservation, 150Mbps Wireless N Nano Router

TL-WR702N

150Mbps Wireless N Nano Router

To use the DHCP server function of the Router, you must configure all computers on the LAN as "Obtain an IP Address automatically".

6.7.2 DHCP Clients List

Choose menu “DHCP → DHCP Clients List”, and then you can view the information about the clients attached to the Router in the screen as shown in Figure 6-11.

Figure 6-11 DHCP Clients List

¾Client Name - The name of the DHCP client

¾MAC Address - The MAC address of the DHCP client

¾Assigned IP - The IP address that the Router has allocated to the DHCP client

¾Lease Time - The time of the DHCP client leased. After the dynamic IP address has expired, a new dynamic IP address will be automatically assigned to the user.

You cannot change any of the values on this page. To update this page and to show the current attached devices, click the Refresh button.

6.7.3 Address Reservation

Choose menu “DHCP → Address Reservation”, and then you can view and add a reserved address for clients via the next screen (shown in Figure 6-12).When you specify a reserved IP address for a PC on the LAN, that PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses should be assigned to the servers that require permanent IP settings.

Figure 6-12 Address Reservation

- 114 -