TP-Link TL-WR702N manual Wireless Security, 150Mbps Wireless N Nano Router

TL-WR702N

150Mbps Wireless N Nano Router

¾Authentication Type - This option should be chosen if the key type is WEP (ASCII) or WEP (HEX). It indicates the authorization type of the Root AP.

¾Password - If the AP your Router is going to connect needs password, you need to fill the password in this blank.

Be sure to click the Save button to save your settings on this page.

)Note:

1.The operating distance or range of your wireless connection varies significantly based on the physical placement of the Router. For best results, place your Router.

zNear the center of the area in which your wireless stations will operate.

zIn an elevated location such as a high shelf.

zAway from the potential sources of interference, such as PCs, microwaves, and cordless phones.

zAway from large metal surfaces.

2.Failure to follow these guidelines can result in significant performance degradation or inability to wirelessly connect to the Router.

7.6.2 Wireless Security

Choose menu “Wireless → Wireless Security”, and then you can configure the security settings of your wireless network.

There are three wireless security modes supported by the Router: WEP (Wired Equivalent Privacy), WPA/WPA2 and WPA-PSK/WPA2-PSK.

- 128 -