TP-Link TL-WR702N manual 150Mbps Wireless N Nano Router, 17 Wireless MAC Filtering

TL-WR702N

150Mbps Wireless N Nano Router

For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z, the length should be between 8 and 63 characters.

For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F, the length should be between 8 and 64 characters.

Please also note the key is case sensitive, this means that upper and lower case keys will affect the outcome. It would also be a good idea to write down the key and all related wireless security settings.

•Group Key Update Period - Specify the group key update interval in seconds. The value should be 30 or above. Enter 0 to disable the update.

Be sure to click the Save button to save your settings on this page.

5.6.3 MAC Filtering

Choose menu “Wireless → MAC Filtering”, and then you can control the wireless access by configuring the Wireless MAC Filtering function, as shown in Figure 5-17.

Figure 5-17 Wireless MAC Filtering

To filter wireless users by MAC Address, click Enable. The default setting is Disabled.

¾MAC Address - The wireless station's MAC address that you want to access.

¾Status - The status of this entry, either Enabled or Disabled.

¾Description - A simple description of the wireless station.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The "Add or Modify Wireless MAC Address Filtering entry" page will appear, shown in Figure 5-18:

- 70 -