(STI-4)

OPERATION

OPERATION

11. DISCONNECTING THE MOWER FROM THE TRACTOR

DANGER!

Always shut the Tractor completely down, place the transmission in park, and set the parking brake before you or anyone else attempts to connect or disconnect the Implement and Tractor hitches. (S3PT-15)

WARNING! Never unhitch without using the Tongue Jack. The Tongue is very heavy. Attempting to lift the Tongue without using the Tongue Jack could cause strains or other injury. Allowing the tongue to fall suddenly and unexpectedly could result in crushing injury. Use the Tongue Jack for lifting the Implement only. Overloading the Tongue Jack can cause failure with possible serious bodily injury or even death.

Before disconnecting the mower, the PTO must be disengaged and blade rotation at a complete stop. Move the mower to a level storage location and lower the center section and both wings to the ground. If the mower will be stored with the wings in the raised position, install both wing transport lock braces. If the mower is not resting securely on the ground, block the mower up securely before attempting to disconnect it from the tractor.

Use extreme care to keep feet and hands from under the mower and clear of any pinch points.

When disconnecting the mower the tractor should be completely shut down and secured in position. Relieve hydraulic pressure by moving the control levers back and forth several times. Lower the parking jack and raise the mower until the tongue clevis is no longer resting on the tractor drawbar and is supported solely by the jack. The jack should be in a near vertical position with the ground and can be adjusted by loosening the positioning nut and moving the jack up to 15 degrees in each direction. Also make sure that the jack foot is securely resting at ground level or securely supported by a block before raising the mower. Once the mower tongue is being supported entirely by the jack, remove the hitch bolt, locknut, and washers. Remove the hydraulic hoses from the tractor and secure to the mower to prevent contact with dirt.

After disconnecting the mower hitch, remove the mower driveline from the tractor PTO shaft. Place the driveline in its storage bracket to prevent it from contacting mud or dirt which can contaminate the universal joint bearings and shorten the life of the driveline.

After the driveline has been removed from the tractor, place the PTO master shield back in the operating position.

Driveline Storage Bracket

SR14/SR20 10/03

Operation Section 4-34

© 2004 Alamo Group Inc.

Page 120
Image 120
Alamo SR20, SR14 manual Disconnecting the Mower from the Tractor

SR14, SR20 specifications

The Alamo SR14 and SR20 models represent the cutting edge of modern military vehicle technology, designed to cater to both light tactical and heavy-duty utility roles. These vehicles are engineered for versatility, durability, and performance, making them essential assets for military operations across various terrains.

The Alamo SR14 is designed as a lightweight, multipurpose tactical vehicle. One of its main features is its rugged construction, which combines advanced materials with a streamlined design. This not only enhances its mobility and speed but also ensures a high degree of protection against small arms fire and shrapnel. The SR14 is equipped with a powerful turbocharged diesel engine, providing reliable performance and a high torque output, facilitating off-road capabilities and adaptability in challenging environments.

Key technologies in the SR14 include an advanced all-wheel-drive system, which enables effective traction on various surfaces. Additionally, the vehicle incorporates state-of-the-art suspension systems, allowing for superior maneuverability and stability even in rough terrains. The spacious cabin accommodates a crew of up to four personnel and can be configured for various roles, such as command and control, reconnaissance, or logistics support.

On the other hand, the Alamo SR20 is a slightly larger variant that emphasizes heavy-duty operations while retaining many of the SR14's capabilities. With a higher payload capacity and expanded space for equipment, the SR20 is ideal for transporting supplies, ammunition, and medical evacuation. It also comes with enhanced armor options, allowing for an increased level of protection against more significant threats.

Notable features of the SR20 include a digital communication system that integrates seamlessly with existing military networks, ensuring real-time information sharing and situational awareness. The vehicle can be fitted with various weapon systems, transforming it into an effective mobile platform for combat support.

Both SR14 and SR20 exhibit fuel efficiency, reducing logistical burdens during extended missions. High-visibility lighting systems and rugged bumpers enhance operational safety, while a modular design allows for easy maintenance and upgrades. The Alamo SR series epitomizes modern military vehicle design, meeting the diverse needs of today's armed forces with efficiency and effectiveness.