OPERATION

OPERATION

9.5 Crossing Ditches and Steep Inclines

When crossing ditches with steep banks or going up sharp inclines, it is possible that the main driveline inner profile will penetrate into the outer housing to its maximum depth until the assembly becomes solid (driveline is at its extreme shortest length). This type of abusive operation can cause serious damage to the tractor and mower drive by pushing the PTO into the tractor and through the support bearings or downward onto the PTO shaft, breaking it off.

WARNING!

Damage resulting from over-collapse of the driveline’s inner profile and its outer housing

 

 

may allow the driveline to come loose from the Tractor which could cause bodily injury

 

to the operator or bystanders and/or extensive damage to the Tractor or Implement

When confronted with an incline or ditch, do not approach from an angle which is perpendicular or straight on as damage to over collapse of the driveline may occur.

When crossing such terrain, the wings should be fully lowered for a lower center of gravity and added stability.

INCORRECT: DO NOT approach ditch straight on.

Inclines and ditches should be approached along a line which is at an angle as shown. This type of path will reduce the possibility of over-collapse of the driveline and resulting damage. If the gradient is so steep that such as approach increases the possibility of a tractor roll-over, select an alternate crossing path.

CORRECT: Approach ditch at an angle

When operating the tractor and mower across slopes and inclines, through ditches, and other uneven terrain conditions, it is important to maintain sufficient deck to ground clearance. Blade contact with the ground may cause soil, rocks and other debris to be thrown out from under the mower resulting in possible injury and/or property damage. Ground contact also produces a severe shock load on the mower drive and to the mower blades resulting in possible damage and premature wear.

SR14/SR20 10/03

Operation Section 4-26

© 2004 Alamo Group Inc.

Page 111 Page 113
Page 112
Image 112
Alamo SR20, SR14 manual Crossing Ditches and Steep Inclines
Page 111 Page 113

SR14, SR20 specifications

The Alamo SR14 and SR20 models represent the cutting edge of modern military vehicle technology, designed to cater to both light tactical and heavy-duty utility roles. These vehicles are engineered for versatility, durability, and performance, making them essential assets for military operations across various terrains.

The Alamo SR14 is designed as a lightweight, multipurpose tactical vehicle. One of its main features is its rugged construction, which combines advanced materials with a streamlined design. This not only enhances its mobility and speed but also ensures a high degree of protection against small arms fire and shrapnel. The SR14 is equipped with a powerful turbocharged diesel engine, providing reliable performance and a high torque output, facilitating off-road capabilities and adaptability in challenging environments.

Key technologies in the SR14 include an advanced all-wheel-drive system, which enables effective traction on various surfaces. Additionally, the vehicle incorporates state-of-the-art suspension systems, allowing for superior maneuverability and stability even in rough terrains. The spacious cabin accommodates a crew of up to four personnel and can be configured for various roles, such as command and control, reconnaissance, or logistics support.

On the other hand, the Alamo SR20 is a slightly larger variant that emphasizes heavy-duty operations while retaining many of the SR14's capabilities. With a higher payload capacity and expanded space for equipment, the SR20 is ideal for transporting supplies, ammunition, and medical evacuation. It also comes with enhanced armor options, allowing for an increased level of protection against more significant threats.

Notable features of the SR20 include a digital communication system that integrates seamlessly with existing military networks, ensuring real-time information sharing and situational awareness. The vehicle can be fitted with various weapon systems, transforming it into an effective mobile platform for combat support.

Both SR14 and SR20 exhibit fuel efficiency, reducing logistical burdens during extended missions. High-visibility lighting systems and rugged bumpers enhance operational safety, while a modular design allows for easy maintenance and upgrades. The Alamo SR series epitomizes modern military vehicle design, meeting the diverse needs of today's armed forces with efficiency and effectiveness.
Top Page Image Contents