MAINTENANCE

STORAGE

Your rotary cutter represents an investment from which you should get the greatest possible benefit. Therefore, when the season is over, the cutter should be thoroughly checked and prepared for storage so that a minimum amount of work will be required to put it back into operation for the next season. The following are suggested storage procedures:

1.Thoroughly clean the cutter.

2.Lubricate the cutter as covered in Maintenance Section.

3.Tighten all bolts and pins to the recommended torque.

4.Check the cutter for worn or damaged parts. Make replacements immediately.

5.Store the cutter in a clean, dry place with the cutter housing resting on blocks.

6.Use spray touch-up enamel where necessary to prevent rust and maintain the appearance of the cutter.

PROPER TORQUE FOR FASTENERS

The chart lists the correct tightening torque for fasteners. When bolts are to be tightened or replaced, refer to this chart to determine the grade of bolts and the proper torque except when specific torque values are assigned in manual text.

RECOMMENDED TORQUE IN FOOT POUNDS UNLESS OTHERWISE STATED IN THE MANUAL*

NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil. They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads.

*

SR20M/SR14M 11/01

Maintenance Section 5-13

© 2004 Alamo Group Inc.

MAINTENANCE

Page 143
Image 143
Alamo SR14, SR20 manual Storage, Proper Torque for Fasteners

SR14, SR20 specifications

The Alamo SR14 and SR20 models represent the cutting edge of modern military vehicle technology, designed to cater to both light tactical and heavy-duty utility roles. These vehicles are engineered for versatility, durability, and performance, making them essential assets for military operations across various terrains.

The Alamo SR14 is designed as a lightweight, multipurpose tactical vehicle. One of its main features is its rugged construction, which combines advanced materials with a streamlined design. This not only enhances its mobility and speed but also ensures a high degree of protection against small arms fire and shrapnel. The SR14 is equipped with a powerful turbocharged diesel engine, providing reliable performance and a high torque output, facilitating off-road capabilities and adaptability in challenging environments.

Key technologies in the SR14 include an advanced all-wheel-drive system, which enables effective traction on various surfaces. Additionally, the vehicle incorporates state-of-the-art suspension systems, allowing for superior maneuverability and stability even in rough terrains. The spacious cabin accommodates a crew of up to four personnel and can be configured for various roles, such as command and control, reconnaissance, or logistics support.

On the other hand, the Alamo SR20 is a slightly larger variant that emphasizes heavy-duty operations while retaining many of the SR14's capabilities. With a higher payload capacity and expanded space for equipment, the SR20 is ideal for transporting supplies, ammunition, and medical evacuation. It also comes with enhanced armor options, allowing for an increased level of protection against more significant threats.

Notable features of the SR20 include a digital communication system that integrates seamlessly with existing military networks, ensuring real-time information sharing and situational awareness. The vehicle can be fitted with various weapon systems, transforming it into an effective mobile platform for combat support.

Both SR14 and SR20 exhibit fuel efficiency, reducing logistical burdens during extended missions. High-visibility lighting systems and rugged bumpers enhance operational safety, while a modular design allows for easy maintenance and upgrades. The Alamo SR series epitomizes modern military vehicle design, meeting the diverse needs of today's armed forces with efficiency and effectiveness.