Alamo SR20, SR14 Maintenance, Caulking Gun w/Silicon, Torque Wrench, Impact Wrench, 3/16 Punch

MAINTENANCE

MAINTENANCE

TOOLS NEEDED FOR DISASSEMBLY AND ASSEMBLY OF DIVIDER GEARBOX.

5

2

6

1 7

4

3

1.	Caulking Gun w/Silicon	5.	Torque Wrench
2.	Impact Wrench	6.	3/16" Punch
3.	Chisel 3/16" wide Blade	7.	10 mm & 14 mm Socket

4.Ball Pin Hammer

WARNING BE CERTAIN TO CLAMP OR SECURELY SUPPORT THE GEARBOX AND SUB- ASSEMBLIES TO PREVENT INJURIES TO HANDS AND FEET DUE TO INADVERTENT DROPPING OR FALLING OVER.

WARNING ALWAYS WEAR SAFETY GLASSES AND GLOVES TO PREVENT EYE AND HAND INJURY WHEN CHISELING OR HAMMERING ON METAL COMPONENTS. HARD- ENED METAL WILL CHIP UN-EXPECTEDLY.

WARNING AN ASSEMBLED GEARBOX IS QUITE HEAVY. USE A HOIST OR GET HELP TO HANDLE THEM SAFELY. LIFT CAREFULLY AND PROPERLY USING YOUR LEGS TO LIFT - NOT YOUR BACK.

NOTICE: REFER TO OPERATOR’S MANUAL FOR INSTRUCTIONS FOR PROPER RE-ASSEMBLY ONTO THE CUTTER DECK. TIGHTEN CORRECTLY.

SR20M/SR14M 04/94 Maintenance Section 5-14

© 2004 Alamo Group Inc.