TP-Link TL-WR702N manual Wireless Statistics

TL-WR702N

150Mbps Wireless N Nano Router

Figure 5-20 Wireless Statistics

¾MAC Address - The connected wireless station's MAC address

¾Current Status - The connected wireless station's running status, one of STA-AUTH /

STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /

Disconnected

¾Received Packets - Packets received by the station

¾Sent Packets - Packets sent by the station

You cannot change any of the values on this page. To update this page and to show the current connected wireless stations, click on the Refresh button.

If the numbers of connected wireless stations go beyond one page, click the Next button to go to the next page and click the Previous button to return the previous page.

)Note:

This page will be refreshed automatically every 5 seconds.

5.7 DHCP

Figure 5-21 Figure 5-21The DHCP menu

There are three submenus under the DHCP menu (shown in ), DHCP Settings, DHCP Clients List and Address Reservation. Click any of them, and you will be able to configure the corresponding function.

5.7.1 DHCP Settings

Choose menu “DHCP → DHCP Settings”, and then you can configure the DHCP Server on the page as shown in Figure 5-22.The Router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are connected to the Router on the LAN.

- 74 -