CONNECTING THE DISPLAY UNIT
TO THE CAMERA
HEAD AND PROBE:
The display unit must be connected to the camera head and probe. To connect the probe to the display unit, make sure the keyed ends are properly aligned (See Fig. 7). Once they are aligned, tighten the nut.
ACCESSORIES INSTALLATION:
The three accessories include mirror tip, hook tip and magnetic tip (See Fig. 2). All are attached to the camera head the same way. Hold the camera head as shown in Fig. 8, slip the semicircle end of the accessory over the flats of the camera head then rotate the accessory 90° to
fix it in place as shown in Fig. 9.
• Connect the grip handle to Monitor
The product can work with the grip detached from screen and the grip attached with screen; Slide the slot at the back screen into the slot of grip in the left direction until you hear the locking sound, which means con- nection is accomplished. Press the lock buckle clip and slide to the right direction to detach the screen (FIG.10).
Note: The wireless function is off while the
product is attached to the screen on the grip, which will en- sure that the image quality does not suffer from outside inter- ference.
7
