Black Box LB308A user manual Command Line Console Management

Chapter 6: Command Line Console Management

4. Example:

The following example enables dynamic VLAN creation for bridge GROUP (1): switch_a(config)#set gvrp dynamic-vlan-creation enable bridge 1 switch_a(config)#

Per port setting:

GVRP:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode). The switch_a(config)# prompt will show on the screen. switch_a(config)#

2. Usage:

Use set port gvrp enable command to enable and set port gvrp disable command to disable GVRP on a port or all ports in a bridge.

3. Command Syntax:

set port gvrp enable all/IFNAME set port gvrp disable all/IFNAME

all All ports added to recently configured bridge. IFNAME The name of the interface.

4. Example:

The following example enables GVRP on the interface fe1 (port 1): switch_a(config)#set port gvrp enable fe1

switch_a(config)# Per port setting: GVRP applicant:

1. Command Mode: Configure mode

Logon to Configure Mode (Configure Terminal Mode).

Page 190 724-746-5500 blackbox.com LB308A