Panasonic KX-HCM280 Revolving it manually, restart Network Camera, Cleaner, Focus buttons, Button

	Operating Instructions
	About Top View Image screen
Problem	Cause and Remedy
Registered Pan/Tilt	When moving Pan/Tilt not using the operation bar, e.g.
positions noticeably	revolving it manually, restart Network Camera.
deviate from actual
ones.
Image is out of	• The lens is dirty or dust is attached. Fingerprints, dust,
focus.	stains, etc. on the lens can degrade the performance of the
	Automatic Focusing feature. Clean the lens with lens
	cleaner.
	• Manual focusing may be set. Press appropriate one of the
	Focus buttons at the operation bar. Refer to page 46 for
	Focus buttons.
	• Blurred images may have been registered when registering
	or modifying the preset button or home position button.
	Adjust the focus in manual focusing again, or press the AF
	button.
	• The image may be out of focus, if the object is too near, or
	depending on the zoom position. Move the object off
	Network Camera, or adjust the zoom position.
	• Some objects are difficult to focus on by AF button. Press
	the AF button and put it into operation again. When the
	objects are still out of focus, adjust the focus using manual
	focusing, or change the objects using Pan/Tilt operation or
	Zooming features. Refer to page 46.
The color of the	• Adjust White Balance by Camera Setup window. Refer to
image is strange.	page 84.
	• To insure the images you are viewing are the best they can
	be, set the Display property setting (color quality) to 24 bit
	or higher. Refer to page 10.
Image flickers.	• If the object is dark, the image will flicker. Make the
	condition around Network Camera brighter.
	• Wrong power line frequency makes images flicker.
	Refer to page 84.

[For assistance, please call: 1-800-272-7033] 125