Operating Instructions

 

About Network Camera Setup

 

 

Problem

Cause and Remedy

 

 

When Top Page

• Enter the correct IP address on the web browser.

does not

• IP address and Subnet Mask of the PC and the Network

appear.

Camera must be in the same class of the private IP address on

 

 

the LAN. Refer to page 25.

The network congestion prevents Top Page from appearing quickly. Wait for a while.

A proxy server may prevent you from connecting directly to Network Camera, set up not to use the proxy server. Refer to page 26 for details.

When Top Page does not appear, port number 80 might not be available. Ask your ISP for the available port number.

When you use DDNS, you need to set Default Gateway and DNS server address. Refer to page 60 for Network window.

When the connection type of the connected Ethernet hub or Ethernet jack of the PC is manually set at Full Duplex, set the connection type of Network Camera manually at Full Duplex. Connection may not be realized depending on the combination of transmission speed (10M/100M) of ports and connection type (Full Duplex/Half Duplex). Follow the table below on the combination of transmission speed of ports and connection type.

Network Camera

Auto

100Base-TX

10Base-TX

Router hub etc.

Negotiation

Full

Half

Full

Half

 

Duplex

Duplex

Duplex

Duplex

Auto Negotiation

 

 

 

Full Duplex

 

100Base-TX Half Duplex

 

 

Full Duplex

 

10Base-T

 

 

Half Duplex

 

 

If Top Page does not appear in the above procedure, press the FACTORY DEFAULT RESET button and set up with the Setup CD-ROM again.

The procedure on page 127 can establish if Network Camera has a defect.

120

Page 120
Image 120
Panasonic KX-HCM280 operating instructions LAN. Refer to