Panasonic KX-HCM280 Mounting on the Ceiling, Wiring through a hole made in the ceiling

Operating Instructions

4.1.2 Mounting on the Ceiling

Mount Network Camera at an even place where vibrations etc. are few. Set the Tilt range to [On the ceiling] on Camera Setup window on page 84. Two ways of wiring can be considered; wiring through a hole made in the ceiling or wiring without making a hole for a cable in the ceiling. Select either one of the two.

Wiring through a hole made in the ceiling

1.Fix the Ceiling Plate B on the ceiling with Screws B.

•Fix the Ceiling Plate B more than 100 mm (4 inches) off the wall or other obstacles from its center.

•Make sure Network Camera is firmly mounted on a beam of wood etc. When there is no beam, apply a board on the other side of the ceiling to make sure Network Camera does not drop.

Keep more than 100 mm (4 inches) off the wall or other obstacles.

Network Camera

Direction

100 mm (4 inches)

Screws B (4 pcs.)

[For assistance, please call: 1-800-272-7033] 99