Panasonic KX-HCM280 Camera Feature Locations, Front View, Lens Power Focus/Zoom Lens, Indicator

Operating Instructions

1.3Camera Feature Locations

1.3.1Front View

Lens (Power Focus/Zoom Lens)

Wide: 5 mm (0.2 inches)—Infinity

Tele: 1 m (40 inches)—Infinity (Refer to page 45.)

Indicator

(Refer to page 90 for the setup.)

Indicator

Indicator can be controlled on Indicator Control window on page 90. Color indications are shown below.

Power	Not on the LAN	Orange	Orange blinking*1	Orange
on	On the LAN	Orange	Green blinking	Green
	Normal Operation		Green
Using	Getting IP address		Green blinking
DHCP	Finish getting IP address		Green
	Updating Firmware		Orange blinking
Pushing FACTORY DEFAULT RESET button			Orange blinking twice
Internal Failure of Network Camera			Red blinking*2

*1 Orange indicator will continue blinking in the DHCP setting. *2 Refer to page 122 for the red blinking.

Lens and Pan/Tilt operation

Operation bar on the Single Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens horizontally from -175° to +175° and vertically from -120° to 0° in mounting on the table and from 0° to +90° in mounting on the ceiling. Refer to page 43 for the Pan/Tilt operation.

Notes

•When the power is on, do not manually revolve the Pan/Tilt. Revolving it forcedly or moving it manually by some mistake may damage the Pan/Tilt operation, or change the registered Pan/Tilt positions from actual ones. Restart Network Camera when the latter case happens.

•Do not touch the lens. Touching it can remove the protective coating from the lens. Fingerprints, dust, stains, etc. on the lens can also degrade the performance of the Automatic Focusing feature.

14