Panasonic KX-HCM280 operating instructions For Indicator Control window

		Operating Instructions
		About Network Camera Setup
Problem		Cause and Remedy
Top Page does	•	Confirm that Default Gateway address is correct on Network
not appear in		window on page 60.
the Internet	•	The broadband router needs Port Forwarding (IP Masquerade)
Connection.
		feature. Refer to the broadband router's manual for details.
	•	Packet Filtering of the broadband router may prohibit access
		from an external network. Refer to the broadband router's
		manual for details.
	•	Access Network Camera from the Internet with the global IP
		address of the broadband router and port number of Network
		Camera.
	•	Some broadband routers reject the global IP address to access
		Network Camera on the same LAN. Access with the private IP
		address of Network Camera.
When forgetting	Check an IP address by using the Setup CD-ROM. Network
the IP address	Camera List window on page 29 can tell you the IP address of
of the Network	Network Camera.
Camera.
When forgetting	Follow the steps below.
the password to	1.	Initialize Network Camera by pressing the FACTORY
access Setup		DEFAULT RESET button.
Page.
	2.
		Reconfigure Network Camera.
Indicator does	•	Confirm that the standard AC adaptor PSLP1242 (Order No.
not light up.		PSLP1242Z) is used.
	•	Confirm that the Indicator Control is disabled. Refer to page 90
		for Indicator Control window.
Indicator is	•	Ethernet cable is not connected properly.
orange.	•	PC, Ethernet hub or broadband router is not working.
Green indicator	Internal Failure of the server or the congestion on the network
continues	traffic when using DHCP may prevent Network Camera from
blinking.	getting the IP address. Ask the network administrator or your ISP.
Orange	Orange indicator blinks when updating firmware on page 93. When
indicator	the Update Firmware failed, refer to page 123.
continues
blinking.

[For assistance, please call: 1-800-272-7033] 121