Henny Penny OFE- 291 manual Switches and Indicators Description Function

Model OFE- 291

3-3. SWITCHES AND INDICATORS (Continued)

Fig.	Item	Description	Function
No.	No.
3-2	9		Press to access Program Modes; once in the Program Mode, it
			is used to advance to the next setting; if pressed along with
			it accesses the Information Mode which has historic
			information on the operator and fryer’s performance
3-2	10		Used to start and stop Cook Cycles, and to stop the timer at
			the end of a Holding Cycle
3-2	11	Menu Card	The name of the food product associated with each product
		Window	selection button; the menu card strip is located behind the
			decal
3-2	12	Product Select	Are used to select the product for cooking;
		Buttons	to use them to start Cook Cycles, see section 3, Special
			Program Mode item SP-10
3-2	13	COOK/PUMP Switch	A 3-way switch with a center OFF position turn the switch
			to the COOK position to operate the fryer; turn the switch to
			the PUMP position to operate the filter pump; certain
			conditions must be met before operating the filter pump;
			these conditions are covered later in the Filtering Section of
			thismanual
3-2	14		Used to manually enter an Idle Mode, or Clean-Out Mode

3-4 703