Model OFE- 291
| require care and proper maintenance. The table below provides a | ||
| summary of scheduled maintenance. The following paragraphs | ||
| provide | ||
| the operator. |
| |
|
| Procedure Frequency |
|
| Filtering of shortening | Daily (at least twice a day) | |
| Changing of shortening | As required | |
| Changing the filter envelope | After | |
|
|
| clogged |
| Cleaning the frypot | Upon initial installation and every | |
|
|
| change of shortening |
| Cleaning rthe Nylatrons | Monthly | |
| Lubricate lid rollers | Annually | |
| Cleaning Nylatrons - Monthly |
| |
MAINTENANCE | 1. Spray Henny Penny biodegradable, food safe, foaming | ||
| |||
|
| degreaser (part no. 12226) on Nylatrons. | |
| 2. | Raise lid up and down several times to spread the degreaser. | |
| 3. | Wipe Nylatrons to remove food soil, grease, and degreaser | |
|
| residue. |
|
Lubricating Lid Rollers
The lid rollers, in the back of the fryer, should be lubricated at least once a year, to allow the lid easy movement.
1.Remove the back shroud of the fryer.
2.Using spindle lube, part number 12124, place a small amount of lube on both top and bottom rollers. Make sure to lube both left and right rollers.
for one second until “PROG” shows in the display, followed by “ENTER CODE”.
2.Enter code 1, 2, 3. “SELECT PRODUCT…PRESS PROG” scrolls across the display.
3.Press and release the desired product button (1 to 10).
If no buttons are pressed within approximately 2 minutes while in the Program Mode, the controls will revert back to the Cook Mode.
Press to copy a product, erase a product, preset a product, erase all products, or preset all products.
4.Press and release 
. The name of that product
shows in the display. Ex. “ NAME“FRIES”.
810 |
