Henny Penny OFE- 291 manual Programming, Change Product Names

			Model OFE- 291
3-15. PROGRAMMING	Change Product Names
(Continued)	a. Press and release	and the first letter, or digit,
	starts flashing.
	b. Press and release	to change the flashing letter.
	c. To continue to the next letter, press		. Then press
	to change this letter.

d.Repeat step c until up to 7 letters are entered.

e.Press and hold to exit Program Mode, or press and

releaseuntil “PRELOAD” shows in display, to continue with Program Mode.

5.The Preload Mode allows the operator to drop large pieces first, with the lid up, before loading the rest of the product. The preload cycle always regulates to the Step 1 cook

temperature. Press to set a pre-load time, or press

if no pre-load is desired

6. Press and release	and “1. COOK TIME” shows in the
display along with the preset time. Press		to change

the time. The time shows in minutes and seconds. Press and hold the buttons, and the time will jump by 5 second increments to a maximum of 59:59.

7.Press and release and “1. TEMP” shows in the display, along with the preset temperature on the right side

of the display. Pressto change the temperature. Press and hold the buttons and the temperature will jump by 5 degree increments to a max. of 380°F (193ºC), and a min. of 190°F (88ºC).

403 3-22