Henny Penny OFE- 291 manual Special Program

Model OFE- 291

3-16. SPECIAL PROGRAM	Product Buttons (Sp-9)
MODE (Continued)	This mode allows you set up the way products are selected,
	and Cook Cycles started, in the cook mode.
	a. Follow steps 1 and 2 above.
	b.Press and release		until “SP-9” and
	“PRODUCT BUTTONS” flashes in the display.
	c. When using the first option, “1,COOK”, pressing a
	product button displays that product and starts the Cook
	Cycle. When nothing is cooking, no product displays.
	d. Press	. to show the second option. If using
	“2,SELECT”, pressing a product button displays the
	product only. Press		to start the Cook Cycle.
	Clean-Out Temperature (Sp-10)
	This allows you to set the number of minutes of the Clean-Out
	Mode.
	a. Follow steps 1 and 2 above.
	b. Press	until “SP-10” and “CLEAN-OUT
	MINUTES” shows in display, along with the preset minutes.
	c. Press	to change the number of minutes, up to 99.
	Clean-Out Temperature (Sp-11)
	This allows you to set the temperature of the Clean-Out Mode.
	a. Follow steps 1 and 2 above.
	b. Press	until “SP-11” and “CLEAN-OUT
	TNP” shows in display, along with the set temperature.

c.Press to change the temperature, up to 212ºF (100ºC).

Nominal Amps Reading (SP-12)-not used on model 291 “SP-12”, “AMPS RDG, NOMINAL” should show on the left side of display, and “OFF” on the right side.

Amps Reading Low Limit (SP-13)-not used on model 291 “SP-13” and “AMPS RDG, LOW LIMIT” should show on the left side of display, and “OFF” on the right side.

Amps Reading High Limit (SP-14)-not used on model 291 “SP-14” and “AMPS RDG, HIGH LIMIT” should show on the left side of display, and “OFF” on the right side.

3-33 403