Henny Penny OFE- 291 manual m. If “4,SCHED” is selected, “SP-8A” shows in the display, and

		Model OFE- 291
3-16. SPECIAL PROGRAM	SCHEDULE
MODE (Continued)	m. If “4,SCHED” is selected, “SP-8A” shows in the display, and
	followed by “SCHEDULE”. Press the	and up

to 4 different times of day can be programmed, by pressing

.

.

EX:

SP-8A “SCHEDULE” F1: 10.00A

SP-8B “SCHEDULE” F2: 2.00P

SP-8C “SCHEDULE” F3: 8.00P

SP-8D “SCHEDULE” F4: - - - -

Unneeded times should be left at “- - - -”, otherwise, “Filter Suggested” shows in the display, prompting the operator to start filtering.

Cooking is still permitted during the “suggested” phase. However, if lockout is enabled, and the fryer still has

not been filtered after one hour, then the controller activates lockout mode and prompts “FILTER LOCKOUT – YOU *MUST* FILTER NOW”.

n.Press and “SP-8E” “SKIP IF

LESS THAN...” shows in the display, followed by the number of loads between filters, ex: “LOAD 4”. In this example, if the suggested filter time occurs, before

4 loads have been cooked, then the filter operation is skipped. If more than 4 loads have been cooked, then “Filter Suggested” shows in the display. The numbers

of loads can be set by pressing		.
o. Press	and “SP-8F” shows in the display, followed by
“LOCKOUT ENABLED?” Press		to choose
“YES” or “NO”.
p. Press	and “SP-8G” shows in the display followed by

SP-8G “LOCKOUT - HEAT OIL...” and a shortening temperature, when reached, allows the operator to filter. Example, “LOCKOUT - HEAT OIL... 300F” means the display shows “FILTER LOCKOUT” “WAIT”, until 300F is reached, then display shows “FILTER LOCKOUT”/”YOU *MUST* FILTER NOW”, and repeated high-low tones are activated. This prompts the user that it is now time

to filter the shortening. Press	to change.
1005	3-32