Henny Penny OFE- 291 manual Language SP-2 Mode, System Initialization SP-3, Audio Volume SP-4

Model OFE- 291

3-16. SPECIAL PROGRAM	Language (SP-2)
MODE (Continued)	a. Follow steps 1 and 2 above.
	b. Press and release	button. “SP-2” and
	“LANGUAGE” flashes on the display, along with the
	language (Ex:” 1.ENGL”)
	c. To toggle to the desired language, press and release		.

System Initialization (SP-3)

This step resets the controls, but doesn’t erase product settings.

a.Follow steps 1and 2 above.

b.Press and release twice. “SP-3” and “DO SYSTEM INIT” flashes on the display, along with “INIT’.

c.Press and hold . “INIT” shows on the display,

a tone sounds, and “IN 3”, “IN 2”, “ IN 1” flashes on the right side of the display. When “INIT” starts flashing on

the left side of the display, release . When “ DONE” shows on the display, the initialization is complete, and the controls now have factory preset parameters.

Audio Volume (SP-4)

The volume of the speaker can be adjusted. a. Follow steps 1 and 2 above.

b. Press 3 times. “SP-4” and “AUDIO VOLUME” flashes on the display, along with the volume value.

c.Press to adjust the speaker volume; 10 the maximum value and 1 the minimum.

Audio Tone (SP-5)

The tone of the speaker can be adjusted.

a.Follow steps 1 and 2 above.

b.Press 4 times. “SP-5” and “AUDIO TONE (HZ)” flashes on the display, along with the tone value.

c. Press to adjust the tone of the speaker; 2000 the maximum,50theminimum.

403 3-28