Panasonic KX-HCM280 Subnet Mask, If you use Network Camera on the LAN, set up

Operating Instructions

		Instructions for the data fields
Static		• Check [Static] when having specified IP address
•	IP Address	assigned to Network Camera from your ISP or
		administrator. Enter the specified IP address and Subnet
•	Subnet Mask
		Mask.
		• If you use Network Camera on the LAN, set up in the
		same class as your PC is in.
		Refer to page 25 for the class.
		• Refer to page 105 for the IP addressing.
DHCP		• Check [DHCP] (Dynamic Host Configuration Protocol),
•	Host Name	when your ISP uses the DHCP server function which
		assigns an IP address to Network Camera
		automatically. Enter the Host name. Follow the
		instructions of your ISP or administrator for the Host
		name.
		• Refer to unavailable character set 1 in page 105 for the
		Host name.
Connection Type		• Use [Auto Negotiation] normally.
		• When you cannot access Network Camera, refer to
		page 120.
Default Gateway*a		• If you have the specified Default Gateway address from
		your ISP or administrator, enter it in this data field.
		• Refer to page 105 for the IP addressing.
DNS Server*a		• Set DNS server address when you use Host Name to
		register Network Camera on Multi-Camera window on
		page 87.
		• If you have the specified DNS server address from your
		ISP or administrator, enter it in this data field. You can
		set up two DNS server addresses.
		• Refer to page 105 for the IP addressing.

62