HP 510 Inkjet Large Format CH336A#B1K manual Troubleshooting System Error Codes

	Troubleshooting
	The layout shown below will be used to refer to both types of
NOTE
	front panels

NOTE

NOTE

Troubleshooting System Error Codes

Chapter 2 - System Error Codes contains a list of system error codes and their respective descriptions and recommended corrective actions. Only try one recommended action at a time and check if the error code has disappeared.

Performing a Service Test on a Failed Assembly

If possible, always perform a Service Test on the component/ assembly that you are about to replace, just to make sure that is the component/assembly that has failed.

If the test on that component/assembly passes, you should NOT replace it.

For information on the Service Tests and how to use them see Chapter 4 - Service Tests and Utilities.

Performing the Necessary Service Calibrations

Is the printer calibrated correctly after replacing a component?

Remember that certain Calibrations are required even if an Assembly has been disassembled to gain access to another Assembly or Component.

For information on the Service Calibrations and how to use them see Chapter 5 - Service Calibrations.

HP DesignJets 500, 510 and 800 Series Printers Service Manual 1-3