HP 510 Inkjet Large Format CH336A#B1K manual Drive Roller Encoder Sensor

Removal and Installation

Drive Roller Encoder Sensor

Removal

WARNING	Switch off the printer and remove the power cord.
	Refer to the table on Page 8-4for information on screw types.
NOTE
	1.	Remove the Left Hand Cover - Refer
		to Page 8-5.
	2.	Remove the Spittoon - Refer to Page
		8-23.
	3.	Remove the Cutter Guide Bracket -
		Refer to Page 8-36.
	4.	Disconnect the Encoder Sensor Cable
		from the Electronics Module.

5. Remove 1 T-8 screw (Type G) from the Encoder Sensor Cover.

8-38 HP DesignJets 500, 510 and 800 Series Printers Service Manual