HP 510 Inkjet Large Format CH336A#B1K manual Right End Roll-Feed

Removal and Installation

Right End Roll-Feed

Removal

WARNING	Switch off the printer and remove the power cord.
	Refer to the table on Page 8-4for information on screw types.
NOTE
	1.	Remove the Right Hand Cover - Refer
		to Page 8-7.
	2.	Remove the Spindle.
	3.	Remove 1 T-20 screw (Type F) from
		the Right Hand Roll-Feed.

4. Remove 2 T-20 screws (Type F) from the Right Hand Roll-Feed (located on the inside).

HP DesignJets 500, 510 and 800 Series Printers Service Manual 8-15