HP 510 Inkjet Large Format CH336A#B1K manual Print Platen

Removal and Installation

Print Platen

Removal

WARNING

NOTE

Switch off the printer and remove the power cord.

Refer to the table on Page 8-4for information on screw types.

1.Remove the Cutter Assembly - Refer to Page 8-32.

2.Remove the Cutter Guide - Refer to Page 8-55.

3.Remove the following screws (Type G) from the Print Platen:

„24 Screws (T-8) for the 24" model.

„36 Screws (T-8) for the 42" model.

4.Pull the tabs out slightly and lift each piece of the Print Platen from the Printer.

NOTE The Print Platen is split into 2 pieces on the 24" model and into 3 pieces on the 42" model.

8-56 HP DesignJets 500, 510 and 800 Series Printers Service Manual