HP 510 Inkjet Large Format CH336A#B1K manual If you want to Reset the Usage Counter

Service Tests and Utilities

	If you want to Reset the Usage Counter
	You should only reset the usage counter for a certain component
NOTE
	when it has been replaced by a new one. Never reset the usage
	counter for a component when it has not been replaced.
	a If you want to reset some of the parameters of the usage counter
	(to consult the usage counters ⇒ Page 4-27), then you should
	select "Reset usage counter" and press ENTER. The following
	information will be displayed on the front panel. You will need to
	use the arrow keys to scroll through the complete list because the
	front panel only allows 6 lines to be displayed at one time. Select
	the usage counter that you want to reset and then press Enter.

Reset usage counter Scan axis usage: Paper axis usage:

Serv. Station usage: Spittoon usage: Pinch-lift usage Cutter usage: Carriage usage: Ink usage:

Menu

Back

Enter

bOnce you make a selection (for example Scan axis usage), the following message will appear on the Front Panel. Press Enter if you want to proceed with resetting the counter or press Cancel if you want to exit without resetting the counter:

Reset usage counter

Scan axis usage:

Press ENTER to continue or CANCEL to quit

Menu

Back

Enter

cTo check if the relevant usage counter has been reset, enter the Printer Information utility ⇒ Page 4-27.

4-20 HP DesignJets 500, 510 and 800 Series Printers Service Manual