HP 510 Inkjet Large Format CH336A#B1K manual System Error Problem Description Corrective Action

System Error:

Problem

Description:

Corrective Action:

System Error:

Problem

Description:

Corrective Action:

System Error:

Problem

Description:

Corrective Action:

System Error Codes

01:10

Electronics Module failure. The possible cause could be:

1.The Electronics Module is of the wrong type (a 16 MB Electronics Module will not work in a 24" Model).

2.Reading, writing or initializing the EEROM failed.

3.One of the ASIC’s was not found within the Serial Bus that connects the Electronics Module to the Carriage Assembly.

4.One of the ASIC’s did not respond to the Serial Bus that connects the Electronics Module to the Carriage Assembly.

5.The Electronics Module is requesting a move to the Service Station while the previous move is still being completed.

6.The Electronics Module Cooling Fan has reached its current limit.

Replace the Electronics Module ⇒ Page 8-24.

01:11

The Electronics Module Cooling Fan badly connected.

Reconnect the Cooling Fan (located on top of the Electronics Module). If the Cooling Fan continues to fail, check that the connector pins in the Electronics Module are NOT bent.

01:12

The EEROM is not configured correctly (the product number may be missing).

Configure the EEROM correctly using the EEROM setup utility ⇒ Page 4-17.

HP DesignJets 500, 510 and 800 Series Printers Service Manual 2-7