HP 510 Inkjet Large Format CH336A#B1K manual Change Ink Tubes

Service Tests and Utilities

	Change Ink Tubes
	The purpose of this Service Utility is to move the Carriage
	Assembly to a position where it makes the removal of the Ink
	Supply Tubes much easier.
	In order to actually replace the Ink Supply Tubes, refer to Page
NOTE
	8-60.

Perform the Change Ink Tubes utility as follows:

1In the Service Utilities submenu, scroll to "Change Ink Tubes" and press Enter.

Service utilities

Change ink tubes Unlock Carriage Turn Drive Roller Prime tubes EEROM Setup

Menu

Back

Enter

2Once the utility starts, the printer will display the following message on the front panel. If you want to abort the Change Ink Tubes utility, press Cancel and you will return to the Set-up menu.

Change ink tubes

Press ENTER to continue or CANCEL to quit

3If you press Enter, the Carriage will move to a position where you change the Ink Supply Tubes and the following message will be displayed on the Front Panel. You should switch the Printer OFF before starting to change the Ink Supply Tubes.

1.Switch off the machine

2.Refer to the Service Manual to replace

tubes

NOTE	The next time the Printer is switched ON, it will automatically
	start the Priming process.

4-26 HP DesignJets 500, 510 and 800 Series Printers Service Manual