Removal and Installation

Pinch-Arm Mechanism

Removal

WARNING

NOTE

Switch off the printer and remove the power cord.

Refer to the table on Page 8-4for information on screw types.

1.Remove the Back Platen (make sure the Pinch-Arm Lever is in the UP Position) - Refer to Page 8-17.

2.Remove ALL the Pinch-Arms - Refer to Page 8-66.

3.Remove 1 T-15 screw (Type E) that attaches the Cam to the Lever.

4.Remove 1 T-15 screw from the left hand side of the Cam.

HP DesignJets 500, 510 and 800 Series Printers Service Manual

8-67

Page 234
Image 234
HP 510 Inkjet Large Format CH336A#B1K manual Pinch-Arm Mechanism