HP 510 Inkjet Large Format CH336A#B1K manual Interconnect Cable

Removal and Installation

Interconnect Cable

Removal

WARNING	Switch off the printer and remove the power cord.
	1.	Remove the Left Hand Cover - Refer
		to Page 8-5.
	2.	Remove the Right Hand Cover - Refer
		to Page 8-7.
	3.	Remove the Electronics Module -
		Refer to Page 8-24.
	4.	Remove the Left Encoder Holder -
		Refer to Page 8-33.
	5.	Remove the Service Station - Refer to
		Page 8-52.
	6.	Remove the Service Station Holder -
		Refer to Page 8-57.
	7.	Slide the Cable out of the Printer from
		the right hand side.

NOTE

Make sure when removing the cable that it does NOT scratch against the edge of the beam.

NOTE

Make sure that the Plastic Protector is NOT removed while removing the Cable.

HP DesignJets 500, 510 and 800 Series Printers Service Manual 8-59