HP 510 Inkjet Large Format CH336A#B1K manual Check for ink

Troubleshooting

message on the Front Panel:

Unable to prepare ink system.

Open window to check SETUP printheads

Open the Window and you will see the following message on the Front Panel:

1.Lift printhead cover

2.Check if there is ink inside printhead windows

3.Press ENTER to continue

Menu

Back

Enter

Check for ink

Open the Carriage Cover and check if there is ink inside the Start-up Printheads. On the Front Panel you will see the following question and you will need to select the answer depending on whether the Start-up Printheads were filled with ink or not:

Are all printhead windows filled with ink?

ALL with some ink

NOT all with ink

Menu

Back

Enter

If there is ink in all of the Start-up printheads, the Printer considers that the priming procedure has been completed successfully and will proceed to the Printhead replacement process.

If you select NOT all with ink the Printer will react differently depending on the source of the problem:

HP DesignJets 500, 510 and 800 Series Printers Service Manual 1-9