HP 510 Inkjet Large Format CH336A#B1K manual Left End Roll-Feed

Removal and Installation

Left End Roll-Feed

Removal

WARNING	Switch off the printer and remove the power cord.
	Refer to the table on Page 8-4for information on screw types.
NOTE
	1.	Remove the Left Hand Cover - Refer
		to Page 8-5
	2.	Remove the Spindle.
	3.	Remove 1 T-20 screw (Type F) from
		the Left Hand Roll-Feed (located on

the inside next to the Electronics Module).

4. Remove 2 T-20 screws (Type F) from the Left End Roll-Feed.

HP DesignJets 500, 510 and 800 Series Printers Service Manual 8-13