Pelco Dx8000 manual Reconnect The Data And Power Cables, 1b 1a 1c

RECONNECT THE DATA AND POWER CABLES

IMPORTANT: Data and power connectors fit together only one way. All connectors are keyed to ensure that they are inserted in the proper orientation. Examine the drive, motherboard and cable connectors before installation so that connectors are properly aligned. Make sure connectors are seated in the mating connectors securely, but do not force the connection. When installing drive power cables, push the connectors straight in or out; do not rock connectors back and forth.

1.Connect the CD-RW drive to the system motherboard using the data cable that came with your DX8000:

a.Connect the gray connector of the data cable that came with your DX8000 to the CD-RW drive as illustrated in Figure 16.

b.Tuck out of the way the black connector of the data cable that came with your DX8000. This part of the cable will not be connected to a drive.

c.Connect the blue connector of the data cable to the Secondary (black) IDE connector on the system motherboard. Refer to Figure 16.

1b

1a

1c

Figure 16. Installing CD-RW Data Cable

18 C1607M (6/04)