Pelco Dx8000 manual Introduction, Parts List, Tools Needed, Description

Introduction

The following instructions serve as a guide for upgrading the storage capacity of the DX8000 series digital video recorder (DVR). Included are step-by-step directions on how to install the DX8000-UP250 hard disk upgrade kit. The directions illustrate how to upgrade your DVR to accommodate two hard disk drives.

IMPORTANT: If this upgrade requires the replacement of the DX8000Õs primary/system hard disk drive (drive 1 nearest the CD/DVD drive), refer to the instructions for replacing the primary drive (manual number C1606M). This manual should be included with this upgrade kit if a primary drive replacement is necessary.

PARTS LIST

	NOTE: This upgrade kit includes one or more Pelco-certified hard disk drives. Using any other hard disk drives
	with the DX8000 voids the manufacturerÕs warranty for this product.
Qty	Description
1-2	250 GB Hard Disk Drive(s)
0-1	80-pin Straight IDE Data Cable
2-4	Mounting screws

TOOLS NEEDED

1Phillips-head screwdriver #1 (nonmagnetic)

1Properly grounded ESD wrist strap and mat

4 Small containers for storing screws (optional)

C1607M (6/04) 1