Manuals / Pelco / Household Appliance / Home Security System

Pelco Dx8000 manual Mount The Additional Drive

Models: Dx8000

1 32

Download 32 pages 20.54 Kb

Page 16

MOUNT THE ADDITIONAL DRIVE

MOUNT THE ADDITIONAL DRIVE

1.Mount Hard Disk 2 adjacent to Hard Disk 1 in the drive basket closest to the CD-RW drive. Refer to Figure 12 below.

a.Make sure the drive is mounted in the basket so that access to the connectors is not blocked.

b.Attach the drive to the basket using the two screws that came with the upgrade kit.

c.Tighten the screws securely but do not over-tighten.

Figure 12. Inserting Drives into Basket

14	C1607M (6/04)

Image 16

Pelco Dx8000 manual Mount The Additional Drive

Contents

DX8000 Hard Drive Upgrade Installation to a Two-DriveSystemsDX8000 Digital Video RecorderPage PARTS LIST IntroductionTOOLS NEEDED DescriptionGetting Ready Figure 2. Removing Power Cord from Unit C1607M 6/04Figure 3. ESD Protection Preparing Unit for Drive Installation OPEN THE UNIT CHASSISFigure 4. Removing Chassis Cover COMPONENT LAYOUT Move the Front Cross-Brace C1607M 6/04 Disconnect the Data Cable and Power Wire 2.Remove the power connector from the hard drive Figure 9. Removing Hard Drive Power ConnectionPOWER CONNECTOR HARD DRIVERemove the Drive Mount Baskets Install an Additional Drive PREPARE THE DRIVESMOUNT THE ADDITIONAL DRIVE Figure 13. Replacing Drive Basket 2.Mount the drive basket back into the chassisC1607M 6/04 SET THE MASTER / SLAVE JUMPERS Figure 15. Setting Drive Jumpers JUMPER MASTER SLAVE SETTING SETTINGCD-RW DRIVERECONNECT THE DATA AND POWER CABLES 1b 1a 1c2a 2b Figure 18. Installing Hard Drive Power Connectors C1607M 6/04Reassemble the Unit Figure 19. Replacing Front Cross-BraceFigure 20. Replacing Chassis Cover C1607M 6/04Figure 21. Restarting Unit Preparing the New Drives to Store Data Figure 22. Opening List of DrivesFigure 23. Opening Drive Options Menu d.Click Begin Allocation Figure 25. Initializing Drive Allocatione.The following warning appears. Click Yes Figure 26. Format Warning Dialog BoxFigure 27. PDB Database Creation Progress Bar C1607M 6/04 WARRANTY PRODUCT WARRANTY AND RETURN INFORMATIONRETURNS Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & CanadaTel 800/289-9100 Fax 800/289-9150 International Tel 1-559/292-1981 Fax 1-559/348-1120