HP 510 Inkjet Large Format CH336A#B1K manual Encoder Strip

Removal and Installation

Encoder Strip

Removal

WARNING

NOTE

Switch off the printer and remove the power cord.

Refer to the table on Page 8-4for information on screw types.

1.Remove the Left Hand Cover - Refer to Page 8-5.

2.Remove the Right Hand Cover - Refer to Page 8-7.

3.Remove 1 T-15 screw (Type E) that secures the Encoder Strip to the Left Encoder Holder.

4.Release the Encoder Strip from the left hand side.

NOTE The Encoder Strip is sharp so be careful when touching it.

8-76 HP DesignJets 500, 510 and 800 Series Printers Service Manual