HP 510 Inkjet Large Format CH336A#B1K manual Drive Roller

Removal and Installation

Drive Roller

Removal

WARNING	Switch off the printer and remove the power cord.
	1.	Remove the Spindle.
	2.	Remove the Left Hand Cover - Refer
		to Page 8-5.
	3.	Remove the Right Hand Cover - Refer
		to Page 8-7.
	4.	Remove the Left and Right Trims.
	5.	Remove the Front Panel - Refer to
		Page 8-9.
	6.	Remove the Top Cover and Window -
		Refer to Page 8-10.
	7.	Remove all the Media Deflectors -
		Refer to Page 8-11.
	8.	Remove the Back Platen (make sure
		the Lever is in the UP position) -
		Refer to Page 8-17.
	9.	Remove the Media Sensor - Refer to
		Page 8-19.
	10.	Remove the Spittoon - Refer to Page
		8-23.
	11.	Remove the Cutter Assembly - Refer
		to Page 8-32.
	12.	Remove the Cutter Guide Bracket -
		Refer to Page 8-36.
	13.	Remove the Drive Roller Encoder
		Sensor - Refer to Page 8-38.
	14.	Remove the Ink Supply Station -
		Refer to Page 8-48.
	15.	Remove the Cutter Guide - Refer to
		Page 8-55.

8-86 HP DesignJets 500, 510 and 800 Series Printers Service Manual