HP 510 Inkjet Large Format CH336A#B1K manual Pinch-Arm

Removal and Installation

Pinch-Arm

Removal

WARNING	Switch off the printer and remove the power cord.
	Refer to the table on Page 8-4for information on screw types.
NOTE
	1.		Remove the Spindle.
	2.		Remove the Back Platen (make sure
			the Pinch-Arm Lever is in the UP
			Position) - Refer to Page 8-17.
	3.		Remove 2 T-20 screws (Type H) from
			each Pinch-Arm.
				There 5 Pinch-Arms in the
		NOTE
				42" Model and 3 in the 24"
				Model.

4. Remove the Pinch-Arm(s).

8-66 HP DesignJets 500, 510 and 800 Series Printers Service Manual