HP 510 Inkjet Large Format CH336A#B1K manual Service Station Holder

Removal and Installation

Service Station Holder

Removal

WARNING

NOTE

Switch off the printer and remove the power cord.

Refer to the table on Page 8-4for information on screw types.

1.Remove the Left Hand Cover - Refer to Page 8-5.

2.Remove the Right Hand Cover - Refer to Page 8-7.

3.Remove the Right Hand Trim.

4.Remove the Front Panel Assembly - Refer to Page 8-9.

5.Remove the Interconnect PCA - Refer to Page 8-50.

6.Remove the Service Station - Refer to Page 8-52.

7.Remove the Fork Idler, Tensioner and Idler Pulley - Refer to Page 8-74.

8.Remove the Encoder Strip - Refer to Page 8-76.

9.Remove 1 T-15 screw (Type E) that secures the Service Station Holder to the sideplate.

HP DesignJets 500, 510 and 800 Series Printers Service Manual 8-57