HP 510 Inkjet Large Format CH336A#B1K manual Ink Supply Station

Service Tests and Utilities

	T
	PPOR
U
S
E
ON
PH

Ink Supply Station

The purpose of this test is to verify the operation of the Ink Supply Station. A failure of the out-of-ink sensors or the springs in the Ink Supply Station will eventually damage the Printheads because the Printer will try to pump ink from an empty Ink Cartridge stall, which will cause the Printhead to dry-fire.

NOTE

WARNING

This Service Test can be performed by the End User with the guidance of a HP Support person via the phone.

IF POSSIBLE ALWAYS PERFORM THIS TEST BEFORE REPLACING THE INK SUPPLY STATION. IF THIS TEST PASSES, DO NOT REPLACE THE INK SUPPLY STATION.

Perform the Ink Supply Station test as follows:

1In the Service Tests submenu, scroll to "Ink Supply Station" and press Enter.

Service tests

Troubleshooting Aerosol Fan test Ink Supply Station

Paper advance test Carriage movement test

Menu

Back

Enter

2Once the test starts, the following message will appear on the Front Panel. Open the Ink Cartridge door and remove ALL the Ink Cartridges:

ISS Test

Remove all the ink cartridges

4-6 HP DesignJets 500, 510 and 800 Series Printers Service Manual